Academic Honors and Paper

A. Refereed SCI and EI papers

79. “Huang K.David*, Yang Cheng-Jung , Chen Po-Tuan” Fluidity and penetration efficiency of Zn particles on the electrochemical reactions of Zn-air fuel cells.

Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A, 2021, 44(3), 243–251

Full article: High performance zinc–air fuel cell with zinc particle fuel and flowing electrolyte (tandfonline.com)

78. K. David Huang, Cheng-Jung Yang, Po-Tuan Chen (2021) "Fluidity and penetration efficiency of Zn particles on the electrochemical reactions of Zn-air fuel cells"

Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A, 2021, 44(3), 頁 243–251

https://www.tandfonline.com/doi/full/10.1080/02533839.2021.1871652

77. Sangeetha Thangavel, Po-Tuan Chen, Wei-Mon Yan*, Cheng-Jung Yang*,K. David Huang*(2020) "Protection efficiencies of surface-active inhibitors in zinc-air batteries"

International Journal of Energy Research, 2020, 44(14), 頁 11883–11893

https://onlinelibrary.wiley.com/doi/10.1002/er.5831

76. Thangavel Sangeetha, Wei-Mon Yan, Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*(2020) "Electrochemical polarization analysis for optimization of external operation parameters in zinc fuel cells"

RSC Advances, 2020, 10(48), 頁 28807–28818

https://pubs.rsc.org/en/content/articlelanding/2020/RA/D0RA04454G

75. Cheng-Jung Yang, Po-Tuan Chen*, K. David Huang*(2020) "The optimization of electrolyte flow management to increase the performance of Zn–air fuel cells"

International Journal of Energy Research, 2020, 44(6), 頁 4224–4234

https://onlinelibrary.wiley.com/doi/10.1002/er.5052

74. Thangavel Sangeetha, Cheng-Jung Yang, Po-Tuan Chen, Wei-Mon Yan*, K. David Huang*(2020)"Discharge performance of Zn-air fuel cells under the influence of Carbopol 940 thickener"

International Journal of Energy Research, 2020, 44(6), 頁 4543–4555

https://onlinelibrary.wiley.com/doi/10.1002/er.5230

73. Thangavel Sangeetha, Po-Tuan Chen*, Wei-MonYan*, K. David Huang*(2020) "Enhancement of air-flow management in Zn-air fuel cells by the optimization of air-flow parameters"

Energy, 2020, 197, 117181

https://www.sciencedirect.com/science/article/pii/S0360544220302887?via%3Dihub

Advances in Mechanical Engineering, 2020, 12(11)

https://journals.sagepub.com/doi/10.1177/1687814020966927

71. Chia-Hung Chou; Po-Tuan Chen; Cheng-Jung Yang; K. David Huang(2020) "Functionalization of wireless control and fuzzy systems to hybrid mini-loaders"

IEEE Access, 2020, 8, 頁 80914–80921, 9081888

https://ieeexplore.ieee.org/document/9081888

70. Po-Tuan Chen, Fu-Yen Zeng, Xuan-Hao Zhang, Ren-Jei Chung, Cheng-Jung Yang, K. David Huang*(2019)"Composite Sinusoidal Waveform Generated by Direct Digital Synthesis for Healthy Charging of Lithium-Ion Batteries" Energies, 2020, 13(4), 814

https://www.mdpi.com/1996-1073/13/4/814

69. Po-Tuan Chen, Pei-Fan Ding, Cheng-Jung Yang*, K. David Huang*(2019)"Hybrid Power System Design for Multifunctional Mini-Loader Vehicles"

Applied Sciences (Switzerland), 2019, 9(20), 4439

https://www.mdpi.com/2076-3417/9/20/4439

68. Chen P.-T., Sangeetha T., Hsu T.-W.e,Yang C.-J.f,Yung T.-Y., Yan W.-M., Huang K.D.(2019)"Improved performance of a Zn-air fuel cell by coupling Zn particle fuel and flowing electrolyte"

Chemical Physics Letters, 2019, 728, 頁 160–166

https://www.sciencedirect.com/science/article/pii/S000926141930380X?via%3Dihub

67. Po-Tuan Chen, Duong Dinh Nghia,Cheng-Jung Yang*, K. David Huang*(2019)"Study of System Integral Energy Efficiency of a Hybrid Pneumatic Power System"

Applied Sciences (Switzerland), 2019, 9(11), 2333

https://www.mdpi.com/2076-3417/9/11/2333

66. Po-Tuan Chen, Da-Jyun Shen, Cheng-Jung Yang*, K. David Huang*(2019)"Development of a Hybrid Electric Motorcycle that Accords Energy Efficiency and Controllability via an Inverse Differential Gear and Power Mode Switching Control" Applied Sciences (Switzerland), 2019, 9(9), 1787

https://www.mdpi.com/2076-3417/9/9/1787

65. Po-Tuan Chen ,Ping-Hao Pai ,Cheng-Jung Yang, and K. David Huang (2019). "Development of Transmission Systems for Parallel Hybrid Electric Vehicles"

Applied Sciences (Switzerland), 2019, 9(8), 1538

https://www.mdpi.com/2076-3417/9/8/1538

64. Cheng-Jung Yang ,Tzu-Chun Yang ,Po-Tuan Chen and K. David Huang (2019)."An Innovative Design of Regional Air Conditioning to Increase Automobile Cabin Energy Efficiency"

Energies 2019, 12(12), 2352.

https://www.mdpi.com/1996-1073/12/12/2352

63. Po-Tuan Chen, Pei-Fan Ding, Cheng-Jung Yang and K. David Huang (2019). "Hybrid power system design for multifunctional mini-loader vehicles"

Applied Sciences 9(20),4439.

https://www.mdpi.com/2076-3417/9/20/4439

62. Po-Tuan ChenThangavel Sangeethacd,Ting Wei Hsu, Cheng-Jung Yang, Tung-Yuan Yung, Wei-Mon Yan, K.David Huang (2019). "Improved performance of a Zn-air fuel cell by coupling Zn particle fuel and flowing electrolyte "Chemical Physics Letters 728, 160-166.

https://www.sciencedirect.com/science/article/pii/S000926141930380X?via%3Dihub

61. Po-Tuan Chen ,D,Duong Dinh Nghia ,Cheng-Jung Yang, and K. David Huang (2019). "Study of system integral energy efficiency of a hybrid pneumatic power system"

Applied Sciences ,9(11),2333 .

https://www.mdpi.com/2076-3417/9/11/2333

60. Po-Tuan Chen,Da-Jyun Shen ,Cheng-Jung Yang and K. David Huang (2019). "Development of a hybrid electric motorcycle that accords energy efficiency and controllability via an inverse differential gear and power mode switching control" Applied Sciences 9(9),1787.

https://www.mdpi.com/2076-3417/9/9/1787

59. Po-Tuan Chen,Ping-Hao Pai, Cheng-Jung Yang,K. David Huang (2019, Apr). ''Development of Transmission Systems for Parallel Hybrid Electric Vehicles.''

Applied Sciences, 9(8),1538.

https://www.mdpi.com/2076-3417/9/8/1538

58. Thangavel Sangeetha;Po-Tuan Chen;Wu-Fu Cheng;Wei-Mon Yan;K. David Huang (2019, Mar). ''Optimization of the Electrolyte Parameters and Components in Zinc Particle Fuel Cells.''Energies, 12(6),1090.

https://www.mdpi.com/1996-1073/12/6/1090

57. Po Tuan Chen,Fang Haur Yang,Zhong Ting Cao,Jyun Ming Jhang,Hong Min Gao,Mo Hua Yang,K. David Huang (2019, Mar). ''Reviving Aged lithium-ion Batteries and Prolonging their Cycle Life by Sinusoidal Waveform Charging Strategy.''Batteries & Supercaps

https://onlinelibrary.wiley.com/doi/full/10.1002/batt.201900022

56. Po Tuan Chen, Fang Haur Yang, Thangavel Sangeetha, Hong Min Gao, K. David Huang (2018, Nov). ''Moderate Energy for Charging Li Ion Batteries ‐ Determined by First Principles Calculations.''Batteries & Supercaps, 1(6) 209- 214.

https://onlinelibrary.wiley.com/doi/full/10.1002/batt.201800052

55. K. David Huang, Thangave, Sangeetha, Wu-Fu Cheng, Chunyo Lin, Po-Tuan Chen (2018, Aug). ''Computational Fluid Dynamics Approach for Performance Prediction in a Zinc–Air Fuel Cell.''Energies, 11(9), 2185.

https://www.mdpi.com/1996-1073/11/9/2185

54. N.A. Tuan, K.D. Huang (2014, Apr). ''Study of a Micro Thermal Environment of a Personal Air-Conditioning.''

International Journal of Environmental Science and Development.

https://pdfs.semanticscholar.org/8ff8/3e9b6b142bd23c4c47ded11f6726d565455e.pdf

53. Chen Yang Wu, K.D. Huang, Horng Yi Tang (2014, Jan). ''Novel Method for Floating Synthesizing Heavy Metal Particles as Flowing Anode of Zinc-Air Fuel Cell.''

Advances in Materials Science and Engineering.

https://www.hindawi.com/journals/amse/2014/615391/abs/

52. "Design and experimental verification of an active energy management module for a three-energy-source electric vehicle",

Advances in Science, Technology and Engineering Systems Journal, ELSE2, 2017/02/01

https://ieeexplore.ieee.org/abstract/document/7840317

51. Chen Yang Wu, K.D. Huang and Horng Yi Tang, "Novel Method for Floating Synthesizing Heavy Metal Particles as Flowing Anode of Zinc-Air Fuel Cell,"

Advances in Materials Science and Engineering, Vol. 2014, Article ID 615391, 7 pages, 2014.

https://www.hindawi.com/journals/amse/2014/615391/abs/

50. K.D. Huang, T.H. Chen, "Study of Energy Merger Management of a Hybrid Pneumatic Power System,"

9^th WSEAS International Conference on Heat and Mass Transfer, Jan., 2012 (EI)

http://www.wseas.us/e-library/conferences/2012/CambridgeUSA/FLUHMABE/FLUHMABE-08.pdf

49. N.A. Tuan, K.D. Huang, "Design Parameter Analysis of a Novel Energy-saving Regional Air-conditioning system,"

Advanced Science Letter, 2012 (SCI)

https://www.ingentaconnect.com/content/asp/asl/2012/00000009/00000001/art00035

48. N.A Tuan, K.D. Huang, "Airflow circulation cell study of an air-conditioning energy-saving mechanism,"

Applied Thermal Engineering, Vol.31, pp.3956-62, 2011. (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S1359431111004066

47. M.J. Kao and K. D. Huang, "Experimental Analysis of Nanomechanics of Spherical Titanium Oxide Nanooils in Reducing Friction,"

Journal of Nanoscience and. Nanotechnology, Vol.11, pp.7281-7284, 2011. (SCI, EI)

https://www.ingentaconnect.com/content/asp/jnn/2011/00000011/00000008/art00116

46. H. Chang, M.J. Kao, C.H. Peng, C.G. Kuo, and K.D. Huang, "Thermoelectric Properties of Sb₂Te₃ Thin Films by Electron Beam Evaporation,"

Journal of Nanoscience and. Nanotechnology Vol. 11, pp.7491-7494, 2011. (SCI, EI)

https://www.ingentaconnect.com/content/asp/jnn/2011/00000011/00000008/art00166

45. M.J. Kao, H. Chang, C.G. Kuo, K.D. Huang, and Y.L. Chen "Fabrication and Characterization of Photoelectrode Thin Films with Different Morphologies of TiO₂ Nanoparticles for Dye-Sensitized Solar Cells,"Journal of Nanoscience and. Nanotechnology, Vol. 11, pp.7459-7462, 2011. (SCI, EI)

https://www.ingentaconnect.com/content/asp/jnn/2011/00000011/00000008/art00158

44. H. Chang, M.J. Kao, K.D. Huang, C.G. Kuo and S.Y. Huang, "Electromagnetic Shielding Effectiveness of Thin Film with Composite Carbon Nanotubes and Stainless Steel Fibers,"

Journal of Nanoscience and Nanotechnology, Vol. 11, pp.1754-1757, Feb., 2011 (SCI, EI)

https://www.ingentaconnect.com/content/asp/jnn/2011/00000011/00000002/art00167

43. H. Chang, K.C. Cho, C.J. Yu, K.D. Huang, and C.C. Chen, "Integration of CuO Thin Film and Bi₂Te₃ for Enhancing the Thermoelectric Conversion Efficiency of Thermoelectric Generator," Advanced Materials Research, Vol. 152-153, pp.768-771, Jan., 2011 (SCI, EI)

https://www.scientific.net/AMR.152-153.768

42. H. Chang, M.J. Kao, K.D. Huang, S.L. Chen and Z.R. Yu, "A Novel Photo-Thermoelectric Generator Integrating Dye-Sensitized Solar Cells with Thermoelectric Modules,"

Japanese Journal of Applied Physics, Vol. 49(6), 06GG08-1-4, 2010 (SCI, EI)

https://iopscience.iop.org/article/10.1143/JJAP.49.06GG08

41. B.J. Tsai, K.D. Huang, and C.H. Lee, "Hybrid Structural Systems of An Active Building Envelope System (ABE),"

Advanced Materials Research, Vols. 168-170, pp.2359-2370, 2011 (SCI, EI)

https://www.scientific.net/AMR.168-170.2359

40. H. Chang, Y.M. Yeh and K.D. Huang, "Electromagnetic shielding by Composite Films Prepared with Carbon Fiber, Ni Nanoparticles, and Multi-walled Carbon Nanotubes in Polyurethane,"Materials Transactions, The Japan Institute of Metals, Vol. 51, No.6, pp.1145-1149, 2010 (SCI, EI)

https://www.jstage.jst.go.jp/article/matertrans/51/6/51_M2009408/_article/-char/ja/

39. H. Chang, T.L. Chen, K.D. Huang, S.H. Chien and K.C. Hung, ''Fabrication of highly efficient flexible dye-sensitized solar cells,"

Journal of Alloys and Compounds, Vol. 504S, pp.435-438, August 2010 (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S0925838810002586

38. K.D. Huang, S.C. Tzeng, C.H. Liu and J.Y. Leu, "Development of a City Car with a Hybrid Electric System of Two-Planetary Gear Trains,"

ISSN 2078-5453/Journal of Science and Innovation, Vol. 1, No. 2, pp.7-20, 2011.

https://www.airitilibrary.com/Publication/alDetailedMesh?DocID=20785453-201104-201209240030-201209240030-7-19

37. K.D. Huang and A.T. Nguyen, “Numerical Analysis of an Air-Conditioning Energy-Saving Mechanism,”

Building Simulation: An International Journal, Vol.3, pp 63-73, 2010, DOI 10.1007/s12273-010-0302-y. (SCI)

https://link.springer.com/article/10.1007/s12273-010-0302-y

36. H. Chang, M.J. Gao, W.A. Chen, K.D. Huang,, "Application of TiO2 Nanoparticles Coated Multi-wall Carbon Nanotube to Dye-sensitized Solar Cells,"

Journal of Nanoscience and Nanotechnology, Vol. 10, pp.7671-7675, Nov. 10, 2010. (SCI, EI)

https://www.ingentaconnect.com/content/asp/jnn/2010/00000010/00000011/art00156

35. K.D. Huang, K.V. Quang, K.T. Tseng, “Experimental Study of Flow Energy Merger of Hybrid Pneumatic Power System,”

IEEE Trans. on Industry Applications, 2009. (SCI, EI)

https://ieeexplore.ieee.org/abstract/document/4747180

34. K.D. Huang, Q.V. Khong, H.N. Nguyen, and C.H. Lin, "Energy Merger Pipe Optimization of Hybrid Pneumatic Power System by Using CFD,"

International Journal of Green Energy, Volume 7, Issue 3, pp. 310 – 325, 2010. (SCI, EI)

https://www.tandfonline.com/doi/full/10.1080/15435071003796160

33. H. Chang, H.T. Su, W.A. Chen, K.D. Huang, S.H. Chien, S.L. Chen, C.C. Chen, "Fabrication of Multilayer TiO2 Thin Films for Dye-Sensitized Solar Cells with High Conversion Efficiency by Electrophoresis Deposition,"Solar Energy 84 (2010) 130–136, 2010. (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S0038092X0900259X

32. K.D. Huang, A.T. Nguyen, K.T. Tseng, “A Numerical Study of Regional Air Conditioning Mechanism,”

Proceeding of IEEE ICSET 2008, IEEE Xplore digital library, January, 2009. (EI)

https://ieeexplore.ieee.org/abstract/document/4747101

31. H. Chang, Z.Y. Li, M.J. Kao, K.D. Huang, H.M. Wu, "Tribological Property of TiO2 Nanolubricant on Piston and Cylinder Surfaces, "

Journal of Alloys and Compounds, Vol. 495, pp.481-484, April 2010 (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S0925838809019744

30. K.D. Huang, H.N. Nguyen, and Q.V. Khong, "Validation of Dynamic Model of Hybrid Pneumatic Power System,"

SAE paper no. 2009-01-1304, 2009. (EI)

https://saemobilus.sae.org/content/2009-01-1304/

29. H. Chang, H.M. Wu, T.L. Chen, K.D. Huang, C.S. Jwo, Y.J. Lo, "Dye-Sensitized Solar Cell Using Natural Dyes Extracted from Spinach and Ipomoea,"

Journal of Alloys and Compounds, Vol. 495, pp.606-610, April 2010 (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S0925838809020337

28. K.D. Huang, A.T. Nguyen, and Y.C. Shih, “Energy Saving and Thermal Comfort Studies of a Regional Air Conditioning Mechanism,”

Proc. IMechE, Part A: J. Power and Energy, 2010, 224 (1), 13-22. DOI 10.1243/09576509JPE769 (SCI, EI)

https://journals.sagepub.com/doi/abs/10.1243/09576509JPE769

27. H. Chang, T.J. Hsieh, T.L. Chen, K.D. Huang, C.S. Jwo, and S.H. Chien, “Dye-Sensitized Solar Cells Made with TiO2-Coated Multi-Wall Carbon Nanotubes and Natural Dyes Extracted from Ipomoea,”Materials Transactions, Vol. 50, No. 12, pp. 2879-2884, November 2009. (SCI, EI)

https://www.jstage.jst.go.jp/article/matertrans/50/12/50_M2009203/_article/-char/ja/

26. K.D. Huang, K.V. Quang, and K.T. Tseng, “Experimental Study of Exhaust-gas Energy Recycling Efficiency of Hybrid Pneumatic Power System,”

International Journal of Energy Research, Vol. 33, Issue 10, pp. 931-942, August 2009. (SCI, EI)

https://onlinelibrary.wiley.com/doi/abs/10.1002/er.1521

25. K.D. Huang, K.V. Quang, K.T. Tseng, “Study of the Effect of Contraction of Cross-sectional Area on Flow Energy Merger in Hybrid Pneumatic Power System,”

Applied Energy 86 (2009) 2171–2182, April 2009. (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S0306261909000750

24. K.D. Huang, K.V. Quang, K.T. Tseng, “Study of Recycling Exhaust-gas Energy of Hybrid Pneumatic Power System with CFD,”

Energy Conversion and Management 50 (2009) 1271-1278, March 2009. (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S0196890409000284

23. K.D. Huang, S.C. Tzeng, T.M. Jeng, J. R. Wang, S.Y. Cheng, and K.T. Tseng, "Experimental Study of Fluid Flow and Heat Transfer Characteristics in the Square Channel with a Perforation Baffle,"International Communications in Heat and Mass Transfer, Vol. 35, Issue 9, pp. 1106-1112, November 2008. (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S0735193308001486

22. S.C. Tzeng, K.D. Huang, and T.S. Wu, "Effects of Forced Convection and Roughness of Surface on Viscous Coupling Unit of Crossover Utility Vehicles,"

Int. J. Vehicle Design, Vol. 45, No. 4, pp.449-469, August 2007. (SCI, EI)

https://www.inderscienceonline.com/doi/abs/10.1504/IJVD.2007.014915

21. Y.W. Tsai, S.C. Chang, K.D. Huang, C.H. Yang, M.C. Su, T.S. Su and, J.H. Tai, "Study of Electrical Control Systems of a New Parallel Hybrid Electric Heavy Motorcycle,"

J. of Vehicle Engineering, Vol. 4, p.129-146, May 2007.

http://www.airitilibrary.com/Publication/alDetailedMesh?docid=a0000314-200705-x-4-129-146-a

20. K.D. Huang, S.C. Tzeng, W.P. Ma and T.S. Wu, "Thermal Behaviors and Lubrication Properties in Rotary Blade Coupling of Sports Utility Vehicles,"

JSME International Journal, Series B, Vol. 49, No.3, pp.820-830, August 2006. (SCI, EI)

https://www.jstage.jst.go.jp/article/jsmeb/49/3/49_3_820/_article/-char/ja/

19. K.D. Huang, S.C. Tzeng, T.M. Jeng and W.D. Chiang, "Air-conditioning System of an Intelligent Vehicle Cabin,"

Applied Energy, Vol. 83, Issue 6, pp.545-557, March 2006. (SCI, EI)

https://www.sciencedirect.com/science/article/pii/S0306261905000747

18. S.C. Tzeng, W.P. Ma, K.D. Huang, and T.S. Wu, "Flow Structure in an Inner Rotating Annular Channel with Ribbed Wall Cylinder,"

JJAP(Japanese Journal of Applied Physics), Vol. 44, No. 12, Part 1, pp. 8711-8715, Dec. 2005. (SCI, EI)

17. S.C. Tzeng, C.W. Lin, and K.D. Huang, "Heat Transfer Enhancement of Nanofluids in Rotary Blade Coupling,"

Acta Mechanica, Vol. 179, Numbers 1-2, pp.11 – 23, Sept. 2005. (SCI, EI)

16. K.D. Huang, S.C. Tzeng, W.P. Ma and W.C. Chang, "Hybrid Pneumatic Power System which Recycles Exhaust Gas of an Internal-combustion Engine,"

Applied Energy, Vol. 82, Issue 2, pp.117-132, Aug. 2005. (SCI, EI)

15. K.D. Huang, S.C. Tzeng, T.M. Jeng and C.C. Chen, "Integration Mechanism for a Parallel Hybrid Vehicle System,"

Applied Energy, Vol. 82, Issue 2, pp.133-147, Aug. 2005. (SCI, EI)

14. K.D. Huang, S.C. Tzeng, W.C. Chang and C.H. Lee, "Study of Hybrid Pneumatic Power System,"

J. of Vehicle Engineering, Vol. 2, May 2005.

13. K.D. Huang, S.C. Tzeng and W.C. Chang, "Energy-saving Hybrid Vehicle Using a Pneumatic-Power System,"

Applied Energy, Vol. 81, Issue 1, pp.1-18, March 2005. (SCI, EI)

12. S.C. Tzeng, K.D. Huang and C.C. Chen, "Optimization of the Dual Energy Integration Mechanism in a Parallel-type Hybrid Vehicle,"

Applied Energy, Vol. 80, Issue 3, pp.225-245, Feb. 2005. (SCI, EI)

11. K.D. Huang, S.C. Tzeng, W.P. Ma and M.F. Wu, "Intelligent Solar-Powered Automobile-ventilation System,"

Applied Energy, Vol. 80, Issue 2, pp.141-154, Feb. 2005. (SCI, EI)

10. K.D. Huang and S.C. Tzeng, "Development of a Hybrid Pneumatic-Power Vehicle,"

Applied Energy, Vol. 80, Issue 1, pp.47-59, Nov. 2004. (SCI, EI)

9. S.C. Tzeng and K.D. Huang, “Computer Aided Engineering of Engine Cooling System,”

J. of Chienkuo Technology University, Vol. 24, No. 1, pp.21-32, Oct. 2004.

8. K.D. Huang and S.C. Tzeng, "Optimization of Size of Vehicle and Flow Domain for Underhood Airflow Simulation,"

J. of Automobile Engineering, Proceedings of the Institution of Mechanical Engineers Part D, Vol. 218, No. 9, pp.945-951, Sep. 2004. (SCI, EI)

7. K.D. Huang, S.C. Tzeng, and W.P. Ma, "Effects of Anti-Freeze Concentration in the Engine Coolant on the Cavitation Temperature of a Water Pump,"

Applied Energy, Vol. 79, Issue 3, pp.261-273, Sep. 2004. (SCI, EI)

6. K.D. Huang and S.C. Tzeng, "A New Parallel-Type Hybrid Electric-Vehicle,"

Applied Energy, Vol. 79, Issue 1, pp.51-64, Aug. 2004. (SCI, EI)

5. C.W. Lin, K.D. Huang and T.S. Wu, "Experimental Study of Heat Transfer of Rotary Blade Coupling with Forced Convection,"

J. of Chienkuo Technology University, Vol. 23, May 2004.

4. S.C. Tzeng, K.D. Huang, W.P. Ma, C.W. Lin, J.P. Yeh and T.S. Wu, "Study of Temperature Distribution in Rotary Blade Couplings of 4WD Vehicle,"

J. of Vehicle Engineering, Vol. 1, p.18-30, May 2004.

3. R.Y. Dai, Y.C. Hun and K.D. Huang, ”Study of Zn-Air Cell Powered Electric Motorcycle,”

Monthly Journal of Taipower’s Engineering, Vol. 664, pp. 36-47, December 2003.

2. K.D. Huang and W.J. Yang, "Numerical Study of Transport Phenomena in Sessile Droplets during Internal Solidification,"

Numerical Heat Transfer, Part A, 35: 373-392, 1999. (SCI)

1. K.D. Huang and W.J. Yang, "Coordinate Transformations of Boundary Conditions at a Spherical Segment,"

Rivista di Matematica Pura ed Applicata, n. 14, p.115-126, 1994.

B-1. International Conference full papers

1. W.J. Yang, K. Huang et al., Aug. 21-24, 1989, "Capillary Convection with Crystal Growth," NASA Microgravity Science and Technology Annual Meeting, NASA Lewis Research Center, Cleveland, Ohio, USA.

2. K.D. Huang, W.J. Yang and N. Zhang, Aug. 30-Sep. 4, 1993, "Gravitational Effects on Thermocapillary Convection with Solidification," Symposium G.G. Microgravity and Materials, Tokyo, Japan.

3. K.D. Huang, W.J. Yang and S. Mochizuki, September 1998, "Marangoni Effects on Convection and Solidification Inside Sessile Droplets Under Central Point Cooling," 4^thECCOMAS Computational Fluid Dynamics Conference, Athens, Greece.

4. 黃國修，2001年11月，“並聯式混合電動系統能量分配及整合機構的設計”，第三次輕型電動車技術研討會，上海，中國大陸。(NSC 89-EPA-Z-212-003) (國科會邀請)

5. 黃國修，2002年9月，“新型並聯式混合電動動力系統之研發”，電動車動力系統及其配件技術研討會，上海，中國大陸。(NSC 89-EPA-Z-212-003) (國科會邀請)

6. S.C. Tzeng, R.Y. Jou, J.H. Liou, F.S. Jan, K.D. Huang, May, 2003, “Thermal Instability of Rotary Blade Coupling of 4WD Vehicle with Circum Ferential Ribbed Turbulators,” JSAE Annual Congress, Yokohama, Japan.

7. W.P. Ma, S.C. Tzeng, K.D. Huang, J.C. Kuo, November, 2003, “Win-Win Industrial-Academic Cooperation: Development of Closed Aluminum Porous Material Applications,” 1^st North-East Asia International Conference on Engineering & Technology Education, Changhua, Taiwan.

8. K.D. Huang, Dec., 2003, “Development of Electric Motorcycle with Zn-Air Battery,” 2003 Taipei International Power Forum and Exhibition. (Invited Speaker)

9. K.D. Huang, Y.-W. Tsai, S.-C. Chang and C.-C. Lu, "Study of System Energy Management of Parallel Hybrid Electric Heavy Motorcycle," 8^th International Symposium on Advanced Vehicle Control (AVEC), Aug. 20-24, 2006, The Grand Hotel, Taipei, Taiwan.

10. Y.W. Tsai, S.C. Chang, K.D. Huang, T.C. Huang, C.H. Yang, B.H. Lin and M.C. Su, "DSP-Based Brushless Motor Controllers Using a New Output Feedback Sliding Mode Theory," 8^th International Symposium on Advanced Vehicle Control (AVEC), Aug. 20-24, 2006, The Grand Hotel, Taipei, Taiwan.

11. S.C. Chang, K.D. Huang, Y.W. Tsai and C.-H. Chang, "Development of Real-time Monitor System of Test Bench for the Parallel Hybrid Electric Heavy Motorcycle," 8^th International Symposium on Advanced Vehicle Control (AVEC), Aug. 20-24, 2006, The Grand Hotel, Taipei, Taiwan.

12. Y.-W. Tsai, K.D. Huang, S.-C. Chang, C.-F. Shieh, C.-H. Chuang and J.-M. Jhan, "Newly Output Feedback Sliding Mode Control for Mismatched Uncertain Interconnected Systems," IEEE International Conference on Systems, Man, and Cybernetics (SMC), Taipei, Taiwan, October 8-11, 2006.

13. K.D. Huang, V.Q. Khong, S.-H. Wei_,T.-C. Liu, K.-T. Tseng, and Y.-W. Tsai, "Study of an Innovative Hybrid Pneumatic Power System," OS1: Nano-mega Scale Flow Dynamics in Energy Systems, 4^th International Conference on Flow Dynamics, Sendai International Center, Sendai, Japan, Sept. 26-27, 2007.

14. Y.Y. Wu, B.C. Chen, and K.D. Huang, "Application of Hardware-In-the-Loop for Developing the Engine Management System," SAE2007-32-0048, JSAE20076548, International Small Engine Technology Conference (SETC) 2007, Japanese Society of Automotive Engineers.

15. Y.Y. Wu and K.D. Huang, "Improving the Performance of a Small Spark-Ignition Engine by Using Oxygen-Enriched Intake Air," SAE2007-32-0004, JSAE20076504, International Small Engine Technology Conference (SETC) 2007, Japanese Society of Automotive Engineers.

16. Y.Y. Wu, B.C. Chen, and K.D. Huang, "The Effect of Control Strategy and Driving Pattern on the Fuel Economy and Exhaust Emissions of a Hybrid Electric Bus," SAE08PFL-384/2008-01-0306, SAE World Congress & Exhibition 2008, Society of Automotive Engineers, Detroit, Michigan, USA, April 14-17, 2008.

17. K.D. Huang, A.T. Nguyen, T.C. Liu, and K.-T. Tseng, "An Air Conditioning Energy-Saving Mechanism," 19^th International Symposium on Transport Phenomena (ISTP-19), University of Iceland, Reykjavik, Iceland, Aug. 17-20, 2008.

18. K.D. Huang, A.T. Nguyen, K.-T. Tseng, “A Numerical Study of Regional Air Conditioning Mechanism,” IEEE international conference on sustainable energy technologies, Singapore, Nov. 24-27, 2008.

19. K.D. Huang, V.Q. Khong, K.-T. Tseng, “Experimental Study of Flow Energy Merger of Hybrid Pneumatic Power System,” IEEE international conference on sustainable energy technologies, Singapore, Nov. 24-27, 2008.

20. K.D. Huang, V.Q. Khong, H.N. Nguyen, and C.H. Lin, "Energy Merger Pipe Optimization of Hybrid Pneumatic Power System by Using CFD," First International Conference on Applied Energy (ICAE09), Hong Kong, January 5-7, 2009.

21. K.D. Huang and A.T. Nguyen, "CFD Study of a Regional Air-Conditioning Mechanism," First International Conference on Applied Energy (ICAE09), Hong Kong, January 5-7, 2009.

22. K.D. Huang, H.N. Nguyen, and V.Q. Khong, "Validation of Dynamic Model of Hybrid Pneumatic Power System," SAE 09PFL-0282, SAE World Congress & Exhibition 2009, Detroit, Michigan, USA, April 20-23, 2009.

23. Y.Y. Wu, K.D. Huang and Q.A. Nguyen, "Effects of Water-Gasoline Emulsions on Performance and Emission of Lean- Burn Spark-Ignition Engine," 7th Asia-Pacific Conference on Combustion, National Taiwan University, Taipei, Taiwan, May 24-27, 2009.

24. T. Han, T.-C. Hung, K.D. Huang and C.-R. Lin, "Performance Analysis for an Organic Rankine Cycle Using Engine Exhaust Gas as Heat Source," 2009 US-EU-China Thermophysics Conference - Renewable Energy (UECTC-RE-09), Beijing, China, May 28-30, 2009.

25. M.J. Kao, C.C. Yu, Y.Y. Wu, and K.D. Huang, “Evaluating the Role of Spherical Aluminum Oxide Nanoparticles in Reducing Friction between PTFE and Aluminum Alloy Cylinder," 16^th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2009), Beijing, China, July 5-9, 2009.

26. K.D. Huang, V.Q. Khong, and C.H. Lin, “Improvement of Exhaust-Gas Energy Recycling in Hybrid Pneumatic Power System by an Innovative Energy Merger Pipe," 20^th International Symposium on Transport Phenomena (ISTP-20),Victoria, British Columbia, Canada, July 7-10, 2009.

27. K.D. Huang, A.T. Nguyen, and Y.C. Shih, "Numerical and Experimental Analysis of an Air Conditioning Energy-Saving Mechanism," The Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT09), Jeju, Korea, October 20-23, 2009.

28. K.D. Huang, A.T. Nguyen, Q.A. Nguyen, S.J. Lan, "Low Cooling Energy Consumption of Room with Regional Air Conditioning Mechanism," Proceedings of the International Conference on Power Engineering-09 (ICOPE-09), Kobe, Japan, Nov. 16-20, 2009.

29. M.J. Kao, C.C. Yu, and K.D. Huang, "Fabrication of TiO₂ Nanooils by a Plasma Arc Nanoparticles Synthesis System," Proceedings of the International Conference on Advanced Manufacturing 2010, Keng Ting, Taiwan, Feb. 2-5, 2010.

30. H. Chang, M.J. Kao, K.D. Huang, and S.Y. Huang, "A Study of Electromagnetic Shielding Effectiveness of the Composite Carbon Nanotube and Stainless Fiber Thin Film," 2009 International Conference on Nano Science and Nano Technology, Plaza 60, Mokpo Nat'l University, Muan, Korea, Nov. 5 - 6, 2009.

31. H. Chang, T.L. Chen, M.J. Kao, K.D. Huang, and H.J. Peng, "Characterization of the Thin Film on Medium Density Fiberboard Using Al₂O₃ and TiO₂WaterborneWoodenware Coating," 2009 International Conference on Nano Science and Nano Technology, Plaza 60, Mokpo Nat'l University, Muan, Korea, Nov. 5 - 6, 2009.

32. Ho Chang, Kung-Ching Cho, Chih-Jung Yu, K.D. Huang, and Chieh-Chen Chen, "Integration of CuO Thin Film and Bi₂Te₃ for Enhancing the Thermoelectric Conversion Efficiency of Thermoelectric Generator, "2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), Shenzhen, China, November 6-8, 2010.

33. Ho Chang, Mu-Jung Kao, K.D. Huang, Chin-Guo Kuo, Yu-Ling Chen, "Synthesis and characterization of two layer of photoelectrode thin films for dye-sensitized solar cells, " The International Conference on Superlattices, Nanostructures and Nanodevices (ICSNN 2010), July 18th to 23th 2010, Beijing, China.

34. Ho Chang, Mu-Jung Kao, Tien-Li Chen, K.D. Huang, Lii-Jenq Jiang, "Fabrication of double-layer counter electrode thin films and mixed natural dye for dye-sensitized solar cells, " The International Conference on Superlattices, Nanostructures and Nanodevices (ICSNN 2010), July 18th to 23th 2010, Beijing, China.

35. Ho Chang, Ching-Song Jwo, Mu-Jung Kao, K.D. Huang, and Zhi-Rong Yu, "Integration of Dye-Sensitized Solar Cells, thermoelectric modules and electrical storage loop system to constitute a novel optical thermoelectric generator, " Third International Conference on Advanced Nano Materials (ANM 2010), Agadir, Morocco, 12^th to 15^th, September 2010.

36. Ho Chang, Cheng-Hao Peng, Mu-Jung Kao, K.D. Huang, Chin-Guo Kao, "Thermoelectric properties of P-Sb₂InTe₃ thin films by electron beam evaporation,”International Conference on Nano Science and Nano Technologyes, "Nov. 8-9, 2010, Gwangju, Korea.

37. Ho Chang, Lii-Jenq Jiang, Mu-Jung Kao, K.D. Huang, Chin-Guo Kuo, "Preparation of Counter Electrode Thin Film and Natural Dye in Highly Efficient Dye-Sensitized Solar Cells," 23rd International Microprocesses and Nanotechnology Conference, Nov. 9-12, 2010, Fukuoka, Japan.

38. H. Chang, C.G. Kuo, K.C. Cho, K.D. Huang, and S.S. Liang, "Analysis of the Electron Transport Properties in Dye-Sensitized Solar Cells Using Highly Ordered TiO₂ Nanotubes and TiO₂Nanoparticles, " International Conference on Electronic Materials and Nanotechnology for Green Environment (ENGE 2010), Nov. 21-24, Jeju Island, Korea.

39. Ho Chang, Chen-Yu Hsieh, Kung-Ching Cho, and K.D. Huang, "Preparation and Characterization of Membrane-Electrolyte Assembly (MEA) with Porous Pt/Ru/MWCNT Nanocomposite for Direct Methanol Fuel Cell (DMFC), "International Conference on Electronic Materials and Nanotechnology for Green Environment (ENGE 2010), Nov. 21-24, Jeju Island, Korea.

40. Ho Chang, Xiu-Ping Lin, Tien-Li Chen, Kung-Ching Cho, and K.D. Huang, "A Study of Schottky Barrier and Natural Sensitizer to Dye-sensitized Solar Cells Using Three Layers of Photoelectrode Thin Films, "2nd International Conference on Nanomanufacturing (nanoMan2010), Sep. 24-26, 2010, Tianjin, China.

41. Borjang Tsia, K.D. Huang, and Chienho Lee, "Hybrid Structural Systems of An Active Building Envelope System(ABE), "Trans Tech Publications, Dec. 6, 2010, Switzerland.

42. K.D. Huang and N.A.TUAN, "Study of an Airflow Circulation Cell of an Air-Condition Energy-Saving Mechanism, " The 21^stISTP, 2-5 November 2010, Haohsiung City,Taiwan.

43. K.D. Huang, M.Y. Jeng, and C.T. Chiang, "Hybrid Electric System with Inverse Differential Gear," EVS-25, November 5-9, 2010, Shenzhen, China.

44. N.A. Tuan and K.D. Huang, "Design parameter analysis of a novel energy-saving regional air-conditioning system," The 1^stICETI, Nov. 11-15, 2011, Kenting, Taiwan.

45. K.D. Huang and T.H. Chen, "Study of Energy Merger Management of a Hybrid Pneumatic Power System," The 9^stWSEAS, Jan. 25-27, 2012, Cambridge, Massachusetts, USA.

46. T.W. Hsu and K.D. Huang, "Study of a Modular Design Flow-Zinc-Particle Fuel Cell," SAE 2016 World Congress and Exhibition, Apr. 12-14, 2016, Detroit, Michigan, USA.

B-2. National Conference full papers

1. 黃國修，1998年11月，“台灣二、三期新型機車廢氣排放之分析研究”，第十五屆空氣污染控制技術研討會論文集，p. 633-640，高雄，台灣。

2. K.T. Jeng and K.D. Huang, December 1999, “A Study of Flow Characteristics and Discharge Coefficient through Poppet Inlet Valve”，中國機械工程學會第十六屆全國學術研討會論文集，第一冊，p.621-628。

3. 黃國修、劉勇德，2001年12月，“混合式氣動動力系統設計概念”，中國機械工程學會第十八屆全國學術研討會，台北，台灣。(NSC 90-2212-E-212-023)

4. 黃國修、蘇冠銘、楊宗融，2001年12月，“氣泡流對引擎冷卻系統的影響”，中華民國第二十五屆全國力學會議，台中，台灣。(NSC 89-2212-E-212-040)

5. 黃國修，2001年12月，“引擎冷卻系統的電腦輔助工程技術”，中國機械工程學會第十八屆全國學術研討會，台北，台灣。(NSC 89-2212-E-212-007)

6. 黃國修，2001年12月，“引擎水泵浦空蝕溫度之研究”，中國機械工程學會第十八屆全國學術研討會，台北，台灣。(NSC 89-2212-E-212-040)

7. 黃國修、蘇冠銘，2002年12月，“引擎冷卻系統之除氣裝置”，中國機械工程學會第十九屆全國學術研討會，虎尾，台灣。(NSC 89-2212-E-212-040)

8. 黃國修、蘇冠銘，2002年12月，“冷卻水所含防凍劑濃度對水幫浦空蝕溫度的影響”，中國機械工程學會第十九屆全國學術研討會，虎尾，台灣。(NSC 89-2212-E-212-040)

9. 黃國修、吳旻峰，2002年12月，“一種智慧型車輛的區域性空調系統之設計”，中華民國第二十六屆全國力學會議，虎尾，台灣。(NSC 90-2745-P-212-003)

10. 黃國修、戴瑞言、洪義杰，2003年3月，“鋅-空氣燃料電池電動系統之研究”， CAC2003中華民國自動控制研討會暨生物機電系統控制與應用研討會，中壢，台灣。(NSC 91-2622-E-212-010-CC3)

11. 黃國修、莊志偉，2003年3月，“混合式動力機車內燃機最佳化研究”，中華民國燃燒學會第十三屆學術研討會，台北，台灣。(NSC 89-EPA-Z-212-003)

12. 黃國修，2003年4月，“一種可有效回收內燃機廢熱的混合動力引擎”，2003能源科技學術研討會，台北，台灣。(NSC 91-2623-7-212-005-ET)

13. 曾憲中、黃國修、吳台生，2003年5月，“具強制對流之旋轉葉片接合器熱傳實驗研究”，第十屆三軍官校基礎學術研討會，高雄，台灣。

14. 黃國修、劉勇德、張位全，2003年10月，“一種可回收內燃機廢熱之混合式氣動動力系統”，第八屆車輛工程研討會，台北，台灣。

15. 曾憲中、黃國修、吳台生，2003年10月，“具強制對流與環狀擾流肋骨之旋轉葉片接合器熱傳實驗研究”，第八屆車輛工程研討會，台北，台灣。

16. K.D. Huang, S.C. Tzeng, Oct., 2003, “Concept of a Hybrid Pneumatic Power System,” 8^th Vehicular Engineering Conference, Taipei, Taiwan.

17. 黃國修、劉勇德、張位全，2003年12月，“混合式氣動動力系統之動態模擬與分析”，中國機械工程學會第二十屆全國學術研討會，台北，台灣。

18. 黃國修、陳加昌，2004年3月，“並聯式複合電動系統之研究”，CAC2004中華民國自動控制研討會，彰化，台灣。

19. 黃國修，2004年3月，“鋅-空氣電池電動機車研發及原型車之製作”，2004能源科技學術研討會，台北，台灣。(NSC 92-2623-7-212-005-ET)

20. 曾憲中、黃國修、吳台生，2004年10月，“車輛學程在台灣技職教育之現況及發展”，海峽兩岸技職教育研討會，彰化，台灣。

21. 黃國修、吳旻峰、江文鼎，2004年10月，“密閉空間的區域性空調系統之研究-以車廂為例”， 2004航空機械工程學術研討會，高雄，台灣。

22. 黃國修、呂俊逸、蔡竣凱、范鎮麟，2004年10月，“並聯式混合動力高爾夫球車”， 2004航空機械工程學術研討會，高雄，台灣。

23. 黃國修、李建輝，2004年11月，“混合式氣動動力搭配內燃機廢能回收之系統研究”，中國機械工程學會第二十一屆全國學術研討會，高雄，台灣。

24. 黃國修、江文鼎，2004年11月，“智慧型車艙之區域性空調系統之研究”，中國機械工程學會第二十一屆全國學術研討會，高雄，台灣。

25. S.C. Tzeng, K.D. Huang, and T.S. Wu, November 2004, "Characteristic of Temperature Distribution in Rotary Blade Coupling of Four-wheels Drive Vehicle," 21^st CSME Conference, Kaohsiung, Taiwan.

26. 黃國修、洪梓桓，2004年11月，“引擎冷卻系統水幫浦的空蝕現象及全滿式除氣裝置之研究”，2004輸送現象及其應用研討會，台南，台灣。

27. K.D. Huang, C.C. Chen, S.C. Tzeng, and T.M. Jeng, November 2004, "Study of the Parallel Hybrid Electric System with Internal Combustion Engine Running at the Optimal State," 9^th Vehicular Engineering Conference, Tashi, Taiwan.

28. 張舜長、黃國修、李國寶，2004年11月，“混合電動高爾夫球車控制器之設計與製作”，第九屆車輛工程學術研討會，大溪，台灣。

29. S.C. Tzeng, K.D. Huang, and T.S. Wu, December 2004, "Heat Transfer and Flow Mechanisms in Viscous Coupling Unit with Circumferential Ribs," 2004 AASRC/CCAS Joint Conference, Taichung, Taiwan.

30. 黃國修、曾憲中、鄭澤明、鄭森耀，2005年3月，“具階梯障礙塊之方形管道之熱傳特性研究”，第十五屆全國燃燒學術研討會，嘉義，台灣。

31. 黃國修、簡上揚，2005年3月，“鋅-空氣燃料電池之空氣管理之研究”，第十五屆全國燃燒學術研討會，嘉義，台灣。

32. 黃國修、楊子為，2005年8月，“地面效應對汽車冷卻氣流分佈的影響”，第十二屆全國計算流體力學學術研討會，高雄，台灣。

33. 黃國修、鍾宜叡，2005年11月，“鋅-空氣燃料電池空氣和電解液管理之研究”， 2005年ESI-CFD 使用者研討會，台北，台灣。

34. 黃國修、簡上揚，2005年11月，“鋅-空氣燃料電池電解液管理之研究”，中國機械工程學會第二十二屆全國學術研討會，中壢，台灣。

35. 黃國修、江文鼎，2005年11月，“智慧型車廂內區域性空調之實驗量測”，中國機械工程學會第二十二屆全國學術研討會，中壢，台灣。

36. 黃國修、李建輝、魏世弘，2005年11月，“複合式氣動系統之能量匯流管理之研究”，第十屆車輛工程學術研討會，台北，台灣。

37. 黃國修、范鎮麟，2005年11月，“新型並聯式複合動力系統能量管理策略之研究”，第十屆車輛工程學術研討會，台北，台灣。

38. 黃國修、洪梓桓、鍾宜叡，2005年12月，“鋅-空氣電池的空氣流管理之研究”， 2005中國航太學會/中華民航學會聯合學術研討會，高雄，台灣。

39. 黃國修、蔡竣凱、何旻衡，2005年12月，“並聯式複合電動迷你車之研究”， 2005中國航太學會/中華民航學會聯合學術研討會，高雄，台灣。

40. 黃國修、林海平、游皓崴、徐榮傑、張家瑋，2006年3月，“引擎進氣歧管系統流量分析測試”，第十六屆全國燃燒學術研討會，基隆，台灣。

41. Vu-Quang Khong and K.D. Huang, March 2006, "Design Simulation of a Turbo Diesel Engine with an Intercooler," 16^th Combustion Conference, Kee-Lung, Taiwan.

42. 黃國修、游皓崴、徐榮傑、呂百修，2006年8月17-19日，“引擎進、排氣岐管系統流量及溫度分布分析測試”， 第十三屆計算流體力學研討會，台北縣萬里鄉太平洋翡翠灣溫泉渡假飯店，台灣。論文編號: 2215 (一般工業應用)

43. 黃國修、呂哲權、施奕安，2006年11月18日，“新型並聯式複合電動系統之動態模擬與控制之研究”，第十一屆車輛工程學術研討會，台灣彰化大葉大學。

44. 黃國修、鍾宜叡，2006年11月18日，“鋅-空氣電池電解液管理之研究”，第十一屆車輛工程學術研討會，台灣彰化大葉大學。

45. 郭彥賢、莊翊、陳立文、黃國修、林秋豐，2006年11月18日，“逆向差速齒輪式混合動力系統設計暨性能分析”，第十一屆車輛工程學術研討會，台灣彰化大葉大學。

46. 郭彥賢、莊翊、陳立文、黃國修、林秋豐，2006年11月24-25日，“新型逆向差速齒輪式車輛複合動力系統”，中國機械工程學會第二十三屆全國學術研討會，台灣台南崑山科技大學。

47. 黃國修、陳育琮，2006年12月10日，“下燒式焚化爐之溫度與流場之研究”， 2006中國航太學會/中華民航學會聯合學術研討會，台灣中壢國立中央大學。

48. 黃國修、郭桂林、許昭傑、施奕安、楊金晟、蔡踵岳、劉丁吉、許明琅，2007年11月16日，“新型並聯式複合車輛動力系統虛擬監控程式之人機介面設計與應用”，第12屆車輛工程學術研討會，NPUST, Pingtung, Taiwan.

49. 郭桂林、黃國修、楊金晟、蔡踵岳、許昭傑、施奕安，2007年11月16日，“車輛差速行星齒輪式無段變速器之研究”，第12屆車輛工程學術研討會，NPUST, Pingtung, Taiwan.

50. 謝一全、陳適範、陳貞光、黃國修、湯凱霖，2007年11月16~17日，“電致變色薄膜特性之研究”，中國材料科學學會 2007 年會，台灣新竹國立交通大學。

51. 黃國修、郭桂林、施奕安、許昭傑、蔡踵岳、楊金晟，2007年11月23-24日，“逆向差速齒輪式複合電動系統元件之動態模擬分析”，中國機械工程學會第二十四屆全國學術研討會論文集，論文編號：E18-0036，中原大學，台灣桃園。

52. 郭桂林、黃國修、蔡踵岳、楊金晟、施奕安、許昭傑，2007年11月23-24日，“差速齒輪式之動力整合分配機構設計與分析”，中國機械工程學會第二十四屆全國學術研討會論文集，論文編號：E18-0033，中原大學，台灣桃園。

53. 黃國修、陳柏全、張育源、楊政傑，2007年11月29日，“車用維生系統關鍵技術”，96年度國防科技學術合作計畫成果發表會論文集，龍潭渴望園區，台灣桃園。

54. 吳震洋、黃國修、李杰書、鍾宜叡、洪梓桓，2008年1月4~5日，“鋅空氣燃料電池之電解液與空氣流管理之研究”，第二屆台灣氫能與燃料電池學術研討會論文集，台灣科技大學，台灣台北。（獲得優秀海報論文獎）

55. 黃國修、李杰書、鄭伍富、羅文德，2008年10月31日，“鋅燃料電池流動式鋅陽極之研究”，中華民國第十三屆車輛工程學術研討會，明志科技大學，台灣台北。

56. 黃國修、劉丁吉、孔禹廣、阮懷南、林成勳，2008年10月31日，“車輛複合氣動系統”，中華民國第十三屆車輛工程學術研討會，明志科技大學，台灣台北。

57. 郭桂林、黃國修、蔡踵岳、楊金晟、施奕安、許昭傑，2008年10月31日，“逆向差速齒輪式之動力整合分配機構效率分析”，中華民國第十三屆車輛工程學術研討會，明志科技大學，台灣台北。

58. 黃國修、郭桂林、施奕安、許昭傑、鄭明源，2008年11月21-22日，“逆向差速齒輪式複合電動車之能量管理系統設計與分析”，中國機械工程學會第二十五屆全國學術研討會論文集，大葉大學，台灣彰化大村。

59. 黃國修、郭桂林、黃超元、許昭傑、邱振豪，2008年11月21-22日，“複合電動系統實驗平台監控技術之發展”，中國機械工程學會第二十五屆全國學術研討會論文集，大葉大學，台灣彰化大村。

60. 黃國修、魏志銘、石育岑，2008年11月21-22日，“車輛空調能量管理模擬研究”，中國機械工程學會第二十五屆全國學術研討會論文集，大葉大學，台灣彰化大村。

61. 郭桂林、黃國修、楊金晟、蔡踵岳、黃俊瑋，2008年11月21-22日，“車用行星齒輪式無段變速系統之研究”，中國機械工程學會第二十五屆全國學術研討會論文集，大葉大學，台灣彰化大村。

62. K.D. Huang, K.V. Quang, H. N. Nguyen, T.C. Liu and C.H. Lin, November 21 and 22, 2008, " Study of Flow Energy Merging Capability of Hybrid Pneumatic Power System," 25^th National Conference on Mechanical Engineering of CSME, Dayeh University, Taiwan.

63. 黃國修、陳孟甫、張育嘉、謝孟翰，2009年11月20-21日，“ 移動辦公室之區域性空調系統熱流場模擬分析”，中國機械工程學會第二十六屆全國學術研討會論文集，成功大學，台灣台南。

64. 黃國修、張育嘉、陳威至，2010年12月10-11日，“電動車用區域性空調系統研發”，中國機械工程學會第二十七屆全國學術研討會論文集，台北科技大學，台灣台北。

65. 陳梓豪、黃國修，2011年11月11日，“複合氣動系統能量匯流管理之研究”，第十六屆車輛工程學術研討會，台北科技大學，台灣台北。

66. 顏子哲、沈大鈞、黃國修，2012年12月，“逆向差速齒輪式複合電動機車之性能測試與研究”，中華民國第十七屆車輛工程學術研討會論文集。

67. 郭威漢、洪鉦凱、黃國修，2012年12月，“動態陽極設計對鋅顆粒燃料電池性能改善之研究”，中國機械工程學會第二十九屆全國學術研討會論文集

68. 沈大鈞、姚尚甫、黃國修，2013年12月，“逆向差速齒輪式複合電動機車之動力模式切換控制與性能分析”，中華民國第十八屆車輛工程學術研討會論文集。

69. 池勇達、黃國修，2013年05月，“引擎螺栓鎖緊技術之探討” ，2013 精密機械與製造科技研討會論文集。

70. 陳瑞逸、林博煦、黃國修，2015年11月13日，“多電源動車輛實驗平台建置與系統即時監控設計”，中華民國第二十屆車輛工程學術研討會，大葉大學機械與自動化工程學系，台灣彰化。

71. 黃國修、徐行廣、林博煦，2015年12月11-12日，“多元彈性電動車輛電能控制與系統整合設計-電池再生延壽充電控制技術”，中國機械工程學會第三十二屆全國學術研討會，國立高雄應用科技大學，台灣高雄。

72. 黃國修、許庭維、張俊傑，2015年12月11-12日，“流動式鋅燃料電池模組化設計與研究”，中國機械工程學會第三十二屆全國學術研討會，國立高雄應用科技大學，台灣高雄。

73. 陳瑞逸、林博煦、黃國修，2016年12月3-4日，“多電源電動車輛電動系統整合與測試驗證平台之研究與開發”，中國機械工程學會第三十三屆全國學術研討會，工業技術研究院，台灣新竹。

74. 林家宇、黃國修、林博煦、徐行廣，2016年12月3-4日，“自動輔助駕駛車速調控管理技術-最佳化電池BMS管理系統之建立”，中國機械工程學會第三十三屆全國學術研討會，工業技術研究院，台灣新竹。

75. 黃國修、顏暢賢、白秉皓，2016年12月3-4日，“多功能微型裝載機設計與開發”，中國機械工程學會第三十三屆全國學術研討會，工業技術研究院，台灣新竹。

C. Honor

East Yuan Science and technology creativity competition - the finalist final
Name of the entries: regional air conditioning, composite pneumatic system, reverse differential gear type power integration and distribution mechanism.

2013 industrial energy conservation technology innovation competition - the first name of the green technology group is "reverse differential gear type compound electric vehicle".

2013 national green energy and energy saving technology competition - green energy group selected

Name of the entries: "mobile electrolyte metal fuel cell".

72. Po-Tuan Chen, Cheng-Jung Yang*, K David Huang(2020) "Development of energy control system for parallel hybrid power system using dynamic equations and fuzzy theory"